Description
Grip to go over 1.5″Ø tube and is 10″ long. For Vectra 1100 and VX-DC and BRT.
See Tech Support tab to view assembly diagram of BRT swiveling stirrup assembly.
To install: Squirt some hairspray into inside of grip. This acts as a lubricant while wet, and acts as a glue when dry. If after a day the grip is not firmly attached, take grip off and lightly swish a small amount of lacquer thinner on all surfaces of the inner grip. Pour out any liquid and install while still wet. The thinner will wash out the mold release that is keeping the grip from gripping the tube.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 12 × 4 × 4 in |
