Description
Top Plate Bumper BLANK – This bumper is not cut out. You will receive a blank neoprene piece and a copy of the original bumper.
You can mark, cut, drill your piece of neoprene any way you choose.
This is a DIY bumper and we no longer have the original bumper in stock.
NOTE: This is the neoprene cover on the top plate wheel assembly where the cable connects on the 1800, 1850, and VX-18 only.
The cable goes through the center hole. The small end tucks down in front towards the selector shaft. The small hole on the fat end is where our PN 27990 push-in fastener goes.
See PN 39820 for 1800/1850/VX-18 top plate wheel assembly.
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 7 × 5 × 1.75 in |
