Weight Plate – 15lb. – Current plate after 2005 – 60690

Description

One 15lb. Weight Plate.
See PN 60720 for a box of 5.

NOTE: For use with the bottom 10 plates of the 260 lb. stack.  Remove the bottom 10 ten pound plates.  Install the 10 fifteen pound plates and then replace the remaining original plates with the top plate.  The stack will sit the same, but have the ability to use 310 lbs total.

15# plates DO NOT fit on the 1400, 1450, and the VFT100

Use all 20 fifteen pound plates plus one ten pound top plate for the 310 lb. VX-FT machine.

NOTE: These flat front/middle weight plates are used with machines manufactured after January 2005, and are to be used with Selector Pin 60610.

We do not have a pin that is used with the older round front plates at this time.

Please note:  Through the years our powder coat supplier changed their formulas and color palettes. We were forced to change vendors at one point.  The results of these things happening made it impossible for us to keep the same powder coating color on all weights over the years.  When machines went to the retailers, the weight stack on each machine was a uniform color.  This replacement plate will not color match your weight stack but is the last color we used in the factory.  This is an issue we can not avoid.