VX-FT 2:1 Pulley Cable Assembly, Double Swivel Pulley Version – 70270

Description

VX-FT (1 weight stack only) 2:1 Pulley Cable Assembly. Not for 2 weight stack machine.

NOTE: This cable is for the double swiveling pulley used on machines manufactured after October 2009.

Cables are not returnable.

View extensive cable chart in the Tech Support tab on the home page.

You should also order clear cable routing tube, PN 67910.

Install directions: Remove 1 swiveling pulley, connect clear tube, pull in old cable to top of column. Remove old cable. Connect new cable at top of column and pull the clear tube and new cable back out to the swiveling pulley. Reinstall swiveling pulley.

Here is how to tell if your machine is 2:1, 4:1 or 6:1:
2:1 VX-FT 1 stack has a 210 or 260 pound heaviest weight label and has 6’8″ cable travel when pulling one side only and has one pulley on the top weight plate.
4:1 VX-FT 1 stack has a 105 or 130 or 155 pound heaviest weight label and has 12’10” cable travel when pulling one side only and has two pulleys on the top weight plate.
6:1 VX-FT 1 stack has a 70 or 87 or 103 pound heaviest weight label and has 19’0″ cable travel when pulling one side only and has three pulleys on the top weight plate.
Cables are not returnable.