VX-FT (2 Stack) 6:1 Cable Assembly – 70090

Description

VX-FT (2 Stack) 6:1 Cable Assembly- Need qty. 2 per machine.
Cables are not returnable.
See Tech Support tab on the home page to view extensive cable chart listing.
You should also order clear cable routing tube, PN 67910.
Install directions: Remove 1 swiveling pulley, connect clear tube, pull in old cable to top of column. Remove old cable. Connect new cable at top of column and pull the clear tube and new cable back out to the swiveling pulley. Reinstall swiveling pulley.

NOTE: This cable requires 2 per machine.

Here is how to tell if your machine is 2:1, 4:1 or 6:1:
2:1 VX-FT 2 stack has a 130 pound heaviest weight label and has 5’0″ cable travel per arm and has one pulley on the top weight plate.
4:1 VX-FT 2 stack has a 65 pound heaviest weight label and has 9’7″ cable travel per arm and has two pulleys on the top weight plate.
6:1 VX-FT 2 stack has a 43 pound heaviest weight label and has 14’5″ cable travel per arm and has three pulleys on the top weight plate.