Description
Picture is for reference only.
ONLY ONE – Clear 1/2″ inner diameter x 5/8″ outer diameter x 1/2″ long tube. This tube slides onto the butterfly pawl for sound deadening and proper flip position pawl function.
To install this bumper you will need to heat up the bumper before pushing it onto the pawl. There are several ways to accomplish this, but we have found the microwave to be the easiest and fastest way to accomplish this. We can’t guess the time because all microwaves are different. It should take somewhere between 10 and 20 seconds
One piece of tube only. Does not include the following: PN 28151 steel pawl kit or the parts included in the kit PN 27910 5/32Ø X 7/8 long roll pin, PN 28200 spring, or PN 28930 1/4Ø x 1″ pivot dowel pin.
If you are having trouble with the click/ratchet action of your butterfly arms, it is typically not the pawl block that is the problem. It is most likely this clear tube (missing or not flush with block end) or the spring (sometimes removing the spring, stretching it to ~.3″ longer free length, and then putting the spring back can fix the problem).
See PN 48680 for Vector/Pinnacle Bench clear bumper tube.
See PN 59780 for 1450/VFT-100 Bench strut clear bumper tube.
Additional information
Weight | 1 lbs |
---|---|
Dimensions | 10 × 8 × 3 in |