Description
Tubing to help cable replacement. If your cable was completely broken, or removed from the machine before the replacement cable arrived, you would need something in place to pull in the new cable. Below is instructions on using this tubing.
Push this clear tube over one cable end securely (use a small amount of tape to keep on if long cable). Pull cable out of machine which will pull this clear tube into the machine in its place. Then reverse to pull final/new cable into the machine while pulling out this clear tubing.
Do not tape over bulb/ball of cable end fitting which will enlarge the joint and possibly get caught inside of the machine.
Click image to view tape installation sketch.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 7 × 3 in |
