Low Pulley/Leg Extension Cable Kit (low pulley cable no longer has 10″ stripped integral extension end at low pulley).
This kit replaces PN 40960
The following items are included in the kit:
PN 47930 10″ Extension Cable Assembly
PN 70780 LP/Leg Cable Assembly.
See Tech Support tab on the home page to view cable stop ball install directions and the extensive cable chart. Cables are not returnable.
You should also order clear cable routing tube, PN 67910.
Install directions: Remove aluminum cable stop ball at leg developer with 1/8″ hex key, remove cable end at leg developer, connect clear tube to cable end at leg developer, pull out old cable at low pulley. Remove old cable. Connect new cable at low pulley and pull the clear tube back out at the leg developer. Reinstall cable stop ball and end at leg developer.
|Dimensions||9 × 8 × 3 in|