(2) Tapered molded black foam roller pad for lat hold down – 61730

$40.00

Description

Molded black Lat Hold Down Pads sold in a set of two.

If you are replacing an older PN 10340 cylindrical foam lat hold down roller with this newer molded roller, you should cut 1.17″ off of each end of the 1″ diameter steel tube because these new rollers are slightly shorter.

You will need PN 51330 mushroom head 1″ tube closure to hold this pad on. They are not reusable.  The old cap will break when being removed.  It is suggested you break off the rest of the exposed rim of the cap.  You will be left with the stem of the cap inside the tube.  This remaining piece can either be knocked further into the tube to make room for insertion of the new cap,  or be drilled out.

Additional information

Weight 1 lbs
Dimensions 10 × 8 × 5 in