Selector Pin – Vectra with magnet -60610

$20.00

Description

Selector Pin – for all gyms (except the 1400 and 1600) made after 1/05. Works with current 10 pound and current 15 pound weight plates and the older round front 10 lb plates.   (because they have the same depth )

See the Tech Support tab on the home page to view  image of all Vectra selector pins to make sure that you are getting the correct one.
See PN 53600 selector pin for original –  older (arcing/round front) 10 pound plate based stacks.
See PN 20760 selector pin for older stacks with 15 pound plates.  The depth  is deeper on the older (arching/round front) 15 lb plates.  The newer 15 lb plates use the same pin as the 10 lb plates because they are the same depth.

More part numbers for your reference:
PN 17080 Screw for guide rod top
PN 16520 Black nylon spacer for guide rod
PN 26130 Rubber finish washer
PN 20660 “U” clip cable retainer
PN 29190 Screw to top plate and shaft
PN 60700 Top Plate
PN 53600 Older selector pin for no 15LB plate stacks
PN 20760 Older selector pin for 15LB plate stacks
PN 46700 Selector shaft 15 plates
PN 20630 Selector shaft 20 plates
PN 69600 Selector shaft 25 plates
PN 57670 under stack Bumper (need 2)

Additional information

Weight 2 lbs
Dimensions 10 × 5 × 3 in